/* Part of SWI-Prolog
Author: Jan Wielemaker
E-mail: J.Wielemaker@vu.nl
WWW: http://www.swi-prolog.org
Copyright (c) 2007-2020, University of Amsterdam
VU University Amsterdam
CWI, Amsterdam
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
*/
:- module(thread,
[ concurrent/3, % +Threads, :Goals, +Options
concurrent_maplist/2, % :Goal, +List
concurrent_maplist/3, % :Goal, ?List1, ?List2
concurrent_maplist/4, % :Goal, ?List1, ?List2, ?List3
concurrent_forall/2, % :Generate, :Test
concurrent_forall/3, % :Generate, :Test, +Options
concurrent_and/2, % :Generator,:Test
concurrent_and/3, % :Generator,:Test,+Options
first_solution/3, % -Var, :Goals, +Options
call_in_thread/2 % +Thread, :Goal
]).
:- autoload(library(apply),[maplist/2,maplist/3,maplist/4,maplist/5]).
:- autoload(library(error),[must_be/2]).
:- autoload(library(lists),[subtract/3,same_length/2]).
:- autoload(library(option),[option/2, option/3]).
:- autoload(library(ordsets), [ord_intersection/3]).
:- autoload(library(debug), [debug/3, assertion/1]).
%:- debug(concurrent).
:- meta_predicate
concurrent(+, :, +),
concurrent_maplist(1, +),
concurrent_maplist(2, ?, ?),
concurrent_maplist(3, ?, ?, ?),
concurrent_forall(0, 0),
concurrent_forall(0, 0, +),
concurrent_and(0, 0),
concurrent_and(0, 0, +),
first_solution(-, :, +),
call_in_thread(+, 0).
:- predicate_options(concurrent/3, 3,
[ pass_to(system:thread_create/3, 3)
]).
:- predicate_options(concurrent_forall/3, 3,
[ threads(nonneg)
]).
:- predicate_options(concurrent_and/3, 3,
[ threads(nonneg)
]).
:- predicate_options(first_solution/3, 3,
[ on_fail(oneof([stop,continue])),
on_error(oneof([stop,continue])),
pass_to(system:thread_create/3, 3)
]).
/** <module> High level thread primitives
This module defines simple to use predicates for running goals
concurrently. Where the core multi-threaded API is targeted at
communicating long-living threads, the predicates here are defined to
run goals concurrently without having to deal with thread creation and
maintenance explicitely.
Note that these predicates run goals concurrently and therefore these
goals need to be thread-safe. As the predicates in this module also
abort branches of the computation that are no longer needed, predicates
that have side-effect must act properly. In a nutshell, this has the
following consequences:
* Nice clean Prolog code without side-effects (but with cut) works
fine.
* Side-effects are bad news. If you really need assert to store
intermediate results, use the thread_local/1 declaration. This
also guarantees cleanup of left-over clauses if the thread is
cancelled. For other side-effects, make sure to use call_cleanup/2
to undo them should the thread be cancelled.
* Global variables are ok as they are thread-local and destroyed
on thread cancellation. Note however that global variables in
the calling thread are *not* available in the threads that are
created. You have to pass the value as an argument and initialise
the variable in the new thread.
* Thread-cancellation uses thread_signal/2. Using this code
with long-blocking foreign predicates may result in long delays,
even if another thread asks for cancellation.
@author Jan Wielemaker
*/
%! concurrent(+N, :Goals, +Options) is semidet.
%
% Run Goals in parallel using N threads. This call blocks until
% all work has been done. The Goals must be independent. They
% should not communicate using shared variables or any form of
% global data. All Goals must be thread-safe.
%
% Execution succeeds if all goals have succeeded. If one goal
% fails or throws an exception, other workers are abandoned as
% soon as possible and the entire computation fails or re-throws
% the exception. Note that if multiple goals fail or raise an
% error it is not defined which error or failure is reported.
%
% On successful completion, variable bindings are returned. Note
% however that threads have independent stacks and therefore the
% goal is copied to the worker thread and the result is copied
% back to the caller of concurrent/3.
%
% Choosing the right number of threads is not always obvious. Here
% are some scenarios:
%
% * If the goals are CPU intensive and normally all succeeding,
% typically the number of CPUs is the optimal number of
% threads. Less does not use all CPUs, more wastes time in
% context switches and also uses more memory.
%
% * If the tasks are I/O bound the number of threads is
% typically higher than the number of CPUs.
%
% * If one or more of the goals may fail or produce an error,
% using a higher number of threads may find this earlier.
%
% @arg N Number of worker-threads to create. Using 1, no threads
% are created. If N is larger than the number of Goals we
% create exactly as many threads as there are Goals.
% @arg Goals List of callable terms.
% @arg Options Passed to thread_create/3 for creating the
% workers. Only options changing the stack-sizes can
% be used. In particular, do not pass the detached or alias
% options.
% @see In many cases, concurrent_maplist/2 and friends
% is easier to program and is tractable to program
% analysis.
concurrent(1, M:List, _) :-
!,
maplist(once_in_module(M), List).
concurrent(N, M:List, Options) :-
must_be(positive_integer, N),
must_be(list(callable), List),
length(List, JobCount),
message_queue_create(Done),
message_queue_create(Queue),
WorkerCount is min(N, JobCount),
create_workers(WorkerCount, Queue, Done, Workers, Options),
submit_goals(List, 1, M, Queue, VarList),
forall(between(1, WorkerCount, _),
thread_send_message(Queue, done)),
VT =.. [vars|VarList],
concur_wait(JobCount, Done, VT, cleanup(Workers, Queue),
Result, [], Exitted),
subtract(Workers, Exitted, RemainingWorkers),
concur_cleanup(Result, RemainingWorkers, [Queue, Done]),
( Result == true
-> true
; Result = false
-> fail
; Result = exception(Error)
-> throw(Error)
).
once_in_module(M, Goal) :-
call(M:Goal), !.
%! submit_goals(+List, +Id0, +Module, +Queue, -Vars) is det.
%
% Send all jobs from List to Queue. Each goal is added to Queue as
% a term goal(Id, Goal, Vars). Vars is unified with a list of
% lists of free variables appearing in each goal.
submit_goals([], _, _, _, []).
submit_goals([H|T], I, M, Queue, [Vars|VT]) :-
term_variables(H, Vars),
thread_send_message(Queue, goal(I, M:H, Vars)),
I2 is I + 1,
submit_goals(T, I2, M, Queue, VT).
%! concur_wait(+N, +Done:queue, +VT:compound, +Cleanup,
%! -Result, +Exitted0, -Exitted) is semidet.
%
% Wait for completion, failure or error.
%
% @arg Exited List of thread-ids with threads that completed
% before all work was done.
concur_wait(0, _, _, _, true, Exited, Exited) :- !.
concur_wait(N, Done, VT, Cleanup, Status, Exitted0, Exitted) :-
debug(concurrent, 'Concurrent: waiting for workers ...', []),
catch(thread_get_message(Done, Exit), Error,
concur_abort(Error, Cleanup, Done, Exitted0)),
debug(concurrent, 'Waiting: received ~p', [Exit]),
( Exit = done(Id, Vars)
-> debug(concurrent, 'Concurrent: Job ~p completed with ~p', [Id, Vars]),
arg(Id, VT, Vars),
N2 is N - 1,
concur_wait(N2, Done, VT, Cleanup, Status, Exitted0, Exitted)
; Exit = finished(Thread)
-> thread_join(Thread, JoinStatus),
debug(concurrent, 'Concurrent: waiter ~p joined: ~p',
[Thread, JoinStatus]),
( JoinStatus == true
-> concur_wait(N, Done, VT, Cleanup, Status, [Thread|Exitted0], Exitted)
; Status = JoinStatus,
Exitted = [Thread|Exitted0]
)
).
concur_abort(Error, cleanup(Workers, Queue), Done, Exitted) :-
debug(concurrent, 'Concurrent: got ~p', [Error]),
subtract(Workers, Exitted, RemainingWorkers),
concur_cleanup(Error, RemainingWorkers, [Queue, Done]),
throw(Error).
create_workers(N, Queue, Done, [Id|Ids], Options) :-
N > 0,
!,
thread_create(worker(Queue, Done), Id,
[ at_exit(thread_send_message(Done, finished(Id)))
| Options
]),
N2 is N - 1,
create_workers(N2, Queue, Done, Ids, Options).
create_workers(_, _, _, [], _).
%! worker(+WorkQueue, +DoneQueue) is det.
%
% Process jobs from WorkQueue and send the results to DoneQueue.
worker(Queue, Done) :-
thread_get_message(Queue, Message),
debug(concurrent, 'Worker: received ~p', [Message]),
( Message = goal(Id, Goal, Vars)
-> ( Goal
-> thread_send_message(Done, done(Id, Vars)),
worker(Queue, Done)
)
; true
).
%! concur_cleanup(+Result, +Workers:list, +Queues:list) is det.
%
% Cleanup the concurrent workers and message queues. If Result is
% not =true=, signal all workers to make them stop prematurely. If
% result is true we assume all workers have been instructed to
% stop or have stopped themselves.
concur_cleanup(Result, Workers, Queues) :-
!,
( Result == true
-> true
; kill_workers(Workers)
),
join_all(Workers),
maplist(message_queue_destroy, Queues).
kill_workers([]).
kill_workers([Id|T]) :-
debug(concurrent, 'Signalling ~w', [Id]),
catch(thread_signal(Id, abort), _, true),
kill_workers(T).
join_all([]).
join_all([Id|T]) :-
thread_join(Id, _),
join_all(T).
/*******************************
* FORALL *
*******************************/
%! concurrent_forall(:Generate, :Action) is semidet.
%! concurrent_forall(:Generate, :Action, +Options) is semidet.
%
% True when Action is true for all solutions of Generate. This has the
% same semantics as forall/2, but the Action goals are executed in
% multiple threads. Notable a failing Action or a Action throwing an
% exception signals the calling thread which in turn aborts all
% workers and fails or re-throws the generated error. Options:
%
% - threads(+Count)
% Number of threads to use. The default is determined by the
% Prolog flag `cpu_count`.
%
% @tbd Ideally we would grow the set of workers dynamically, similar
% to dynamic scheduling of HTTP worker threads. This would avoid
% creating threads that are never used if Generate is too slow or does
% not provide enough answers and would further raise the number of
% threads if Action is I/O bound rather than CPU bound.
:- dynamic
fa_aborted/1.
concurrent_forall(Generate, Test) :-
concurrent_forall(Generate, Test, []).
concurrent_forall(Generate, Test, Options) :-
jobs(Jobs, Options),
Jobs > 1,
!,
term_variables(Generate, GVars),
term_variables(Test, TVars),
sort(GVars, GVarsS),
sort(TVars, TVarsS),
ord_intersection(GVarsS, TVarsS, Shared),
Templ =.. [v|Shared],
MaxSize is Jobs*4,
message_queue_create(Q, [max_size(MaxSize)]),
length(Workers, Jobs),
thread_self(Me),
maplist(thread_create(fa_worker(Q, Me, Templ, Test)), Workers),
catch(( forall(Generate,
thread_send_message(Q, job(Templ))),
forall(between(1, Jobs, _),
thread_send_message(Q, done)),
maplist(thread_join, Workers),
message_queue_destroy(Q)
),
Error,
fa_cleanup(Error, Workers, Q)).
concurrent_forall(Generate, Test, _) :-
forall(Generate, Test).
fa_cleanup(Error, Workers, Q) :-
maplist(safe_abort, Workers),
debug(concurrent(fail), 'Joining workers', []),
maplist(safe_join, Workers),
debug(concurrent(fail), 'Destroying queue', []),
retractall(fa_aborted(Q)),
message_queue_destroy(Q),
( Error = fa_worker_failed(_0Test, Why)
-> debug(concurrent(fail), 'Test ~p failed: ~p', [_0Test, Why]),
( Why == false
-> fail
; Why = error(E)
-> throw(E)
; assertion(fail)
)
; throw(Error)
).
fa_worker(Queue, Main, Templ, Test) :-
repeat,
thread_get_message(Queue, Msg),
( Msg == done
-> !
; Msg = job(Templ),
debug(concurrent, 'Running test ~p', [Test]),
( catch_with_backtrace(Test, E, true)
-> ( var(E)
-> fail
; fa_stop(Queue, Main, fa_worker_failed(Test, error(E)))
)
; !,
fa_stop(Queue, Main, fa_worker_failed(Test, false))
)
).
fa_stop(Queue, Main, Why) :-
with_mutex('$concurrent_forall',
fa_stop_sync(Queue, Main, Why)).
fa_stop_sync(Queue, _Main, _Why) :-
fa_aborted(Queue),
!.
fa_stop_sync(Queue, Main, Why) :-
asserta(fa_aborted(Queue)),
debug(concurrent(fail), 'Stop due to ~p. Signalling ~q', [Why, Main]),
thread_signal(Main, throw(Why)).
jobs(Jobs, Options) :-
( option(threads(Jobs), Options)
-> true
; current_prolog_flag(cpu_count, Jobs)
-> true
; Jobs = 1
).
safe_abort(Thread) :-
catch(thread_signal(Thread, abort), error(_,_), true).
safe_join(Thread) :-
E = error(_,_),
catch(thread_join(Thread, _Status), E, true).
/*******************************
* AND *
*******************************/
%! concurrent_and(:Generator, :Test).
%! concurrent_and(:Generator, :Test, +Options).
%
% Concurrent version of `(Generator,Test)`. This predicate creates a
% thread providing solutions for Generator that are handed to a pool
% of threads that run Test for the different instantiations provided
% by Generator concurrently. The predicate is logically equivalent to
% a simple conjunction except for two aspects: (1) terms are _copied_
% from Generator to the test Test threads while answers are copied
% back to the calling thread and (2) answers may be produced out of
% order.
%
% If the evaluation of some Test raises an exception,
% concurrent_and/2,3 is terminated with this exception. If the caller
% commits after a given answer or raises an exception while
% concurrent_and/2,3 is active with pending choice points, all
% involved resources are reclaimed.
%
% Options:
%
% - threads(+Count)
% Create a worker pool holding Count threads. The default is
% the Prolog flag `cpu_count`.
%
% This predicate was proposed by Jan Burse as
% balance((Generator,Test)).
concurrent_and(Gen, Test) :-
concurrent_and(Gen, Test, []).
concurrent_and(Gen, Test, Options) :-
jobs(Jobs, Options),
MaxSize is Jobs*4,
message_queue_create(JobQueue, [max_size(MaxSize)]),
message_queue_create(AnswerQueue, [max_size(MaxSize)]),
ca_template(Gen, Test, Templ),
term_variables(Gen+Test, AllVars),
ReplyTempl =.. [v|AllVars],
length(Workers, Jobs),
Alive is 1<<Jobs-1,
maplist(thread_create(ca_worker(JobQueue, AnswerQueue,
Templ, Test, ReplyTempl)),
Workers),
thread_create(ca_generator(Gen, Templ, JobQueue, AnswerQueue),
GenThread),
State = state(Alive),
call_cleanup(
ca_gather(State, AnswerQueue, ReplyTempl, Workers),
ca_cleanup(GenThread, Workers, JobQueue, AnswerQueue)).
ca_gather(State, AnswerQueue, ReplyTempl, Workers) :-
repeat,
thread_get_message(AnswerQueue, Msg),
( Msg = true(ReplyTempl)
-> true
; Msg = done(Worker)
-> nth0(Done, Workers, Worker),
arg(1, State, Alive0),
Alive1 is Alive0 /\ \(1<<Done),
debug(concurrent(and), 'Alive = ~2r', [Alive1]),
( Alive1 =:= 0
-> !,
fail
; nb_setarg(1, State, Alive1),
fail
)
; Msg = error(E)
-> throw(E)
).
ca_template(Gen, Test, Templ) :-
term_variables(Gen, GVars),
term_variables(Test, TVars),
sort(GVars, GVarsS),
sort(TVars, TVarsS),
ord_intersection(GVarsS, TVarsS, Shared),
ord_union(GVarsS, Shared, TemplVars),
Templ =.. [v|TemplVars].
ca_worker(JobQueue, AnswerQueue, Templ, Test, ReplyTempl) :-
thread_self(Me),
EG = error(existence_error(message_queue, _), _),
repeat,
catch(thread_get_message(JobQueue, Req), EG, Req=all_done),
( Req = job(Templ)
-> ( catch(Test, E, true),
( var(E)
-> thread_send_message(AnswerQueue, true(ReplyTempl))
; thread_send_message(AnswerQueue, error(E))
),
fail
)
; Req == done
-> !,
message_queue_destroy(JobQueue),
thread_send_message(AnswerQueue, done(Me))
; assertion(Req == all_done)
-> !,
thread_send_message(AnswerQueue, done(Me))
).
ca_generator(Gen, Templ, JobQueue, AnswerQueue) :-
( catch(Gen, E, true),
( var(E)
-> thread_send_message(JobQueue, job(Templ))
; thread_send_message(AnswerQueue, error(E))
),
fail
; thread_send_message(JobQueue, done)
).
ca_cleanup(GenThread, Workers, JobQueue, AnswerQueue) :-
safe_abort(GenThread),
safe_join(GenThread),
maplist(safe_abort, Workers),
maplist(safe_join, Workers),
message_queue_destroy(AnswerQueue),
catch(message_queue_destroy(JobQueue), error(_,_), true).
/*******************************
* MAPLIST *
*******************************/
%! concurrent_maplist(:Goal, +List) is semidet.
%! concurrent_maplist(:Goal, +List1, +List2) is semidet.
%! concurrent_maplist(:Goal, +List1, +List2, +List3) is semidet.
%
% Concurrent version of maplist/2. This predicate uses concurrent/3,
% using multiple _worker_ threads. The number of threads is the
% minimum of the list length and the number of cores available. The
% number of cores is determined using the prolog flag =cpu_count=. If
% this flag is absent or 1 or List has less than two elements, this
% predicate calls the corresponding maplist/N version using a wrapper
% based on once/1. Note that all goals are executed as if wrapped in
% once/1 and therefore these predicates are _semidet_.
%
% Note that the the overhead of this predicate is considerable and
% therefore Goal must be fairly expensive before one reaches a
% speedup.
concurrent_maplist(Goal, List) :-
workers(List, WorkerCount),
!,
maplist(ml_goal(Goal), List, Goals),
concurrent(WorkerCount, Goals, []).
concurrent_maplist(M:Goal, List) :-
maplist(once_in_module(M, Goal), List).
once_in_module(M, Goal, Arg) :-
call(M:Goal, Arg), !.
ml_goal(Goal, Elem, call(Goal, Elem)).
concurrent_maplist(Goal, List1, List2) :-
same_length(List1, List2),
workers(List1, WorkerCount),
!,
maplist(ml_goal(Goal), List1, List2, Goals),
concurrent(WorkerCount, Goals, []).
concurrent_maplist(M:Goal, List1, List2) :-
maplist(once_in_module(M, Goal), List1, List2).
once_in_module(M, Goal, Arg1, Arg2) :-
call(M:Goal, Arg1, Arg2), !.
ml_goal(Goal, Elem1, Elem2, call(Goal, Elem1, Elem2)).
concurrent_maplist(Goal, List1, List2, List3) :-
same_length(List1, List2, List3),
workers(List1, WorkerCount),
!,
maplist(ml_goal(Goal), List1, List2, List3, Goals),
concurrent(WorkerCount, Goals, []).
concurrent_maplist(M:Goal, List1, List2, List3) :-
maplist(once_in_module(M, Goal), List1, List2, List3).
once_in_module(M, Goal, Arg1, Arg2, Arg3) :-
call(M:Goal, Arg1, Arg2, Arg3), !.
ml_goal(Goal, Elem1, Elem2, Elem3, call(Goal, Elem1, Elem2, Elem3)).
workers(List, Count) :-
current_prolog_flag(cpu_count, Cores),
Cores > 1,
length(List, Len),
Count is min(Cores,Len),
Count > 1,
!.
same_length([], [], []).
same_length([_|T1], [_|T2], [_|T3]) :-
same_length(T1, T2, T3).
/*******************************
* FIRST *
*******************************/
%! first_solution(-X, :Goals, +Options) is semidet.
%
% Try alternative solvers concurrently, returning the first
% answer. In a typical scenario, solving any of the goals in Goals
% is satisfactory for the application to continue. As soon as one
% of the tried alternatives is successful, all the others are
% killed and first_solution/3 succeeds.
%
% For example, if it is unclear whether it is better to search a
% graph breadth-first or depth-first we can use:
%
% ==
% search_graph(Grap, Path) :-
% first_solution(Path, [ breadth_first(Graph, Path),
% depth_first(Graph, Path)
% ],
% []).
% ==
%
% Options include thread stack-sizes passed to thread_create, as
% well as the options =on_fail= and =on_error= that specify what
% to do if a solver fails or triggers an error. By default
% execution of all solvers is terminated and the result is
% returned. Sometimes one may wish to continue. One such scenario
% is if one of the solvers may run out of resources or one of the
% solvers is known to be incomplete.
%
% * on_fail(Action)
% If =stop= (default), terminate all threads and stop with
% the failure. If =continue=, keep waiting.
% * on_error(Action)
% As above, re-throwing the error if an error appears.
%
% @bug first_solution/3 cannot deal with non-determinism. There
% is no obvious way to fit non-determinism into it. If multiple
% solutions are needed wrap the solvers in findall/3.
first_solution(X, M:List, Options) :-
message_queue_create(Done),
thread_options(Options, ThreadOptions, RestOptions),
length(List, JobCount),
create_solvers(List, M, X, Done, Solvers, ThreadOptions),
wait_for_one(JobCount, Done, Result, RestOptions),
concur_cleanup(kill, Solvers, [Done]),
( Result = done(_, Var)
-> X = Var
; Result = error(_, Error)
-> throw(Error)
).
create_solvers([], _, _, _, [], _).
create_solvers([H|T], M, X, Done, [Id|IDs], Options) :-
thread_create(solve(M:H, X, Done), Id, Options),
create_solvers(T, M, X, Done, IDs, Options).
solve(Goal, Var, Queue) :-
thread_self(Me),
( catch(Goal, E, true)
-> ( var(E)
-> thread_send_message(Queue, done(Me, Var))
; thread_send_message(Queue, error(Me, E))
)
; thread_send_message(Queue, failed(Me))
).
wait_for_one(0, _, failed, _) :- !.
wait_for_one(JobCount, Queue, Result, Options) :-
thread_get_message(Queue, Msg),
LeftCount is JobCount - 1,
( Msg = done(_, _)
-> Result = Msg
; Msg = failed(_)
-> ( option(on_fail(stop), Options, stop)
-> Result = Msg
; wait_for_one(LeftCount, Queue, Result, Options)
)
; Msg = error(_, _)
-> ( option(on_error(stop), Options, stop)
-> Result = Msg
; wait_for_one(LeftCount, Queue, Result, Options)
)
).
%! thread_options(+Options, -ThreadOptions, -RestOptions) is det.
%
% Split the option list over thread(-size) options and other
% options.
thread_options([], [], []).
thread_options([H|T], [H|Th], O) :-
thread_option(H),
!,
thread_options(T, Th, O).
thread_options([H|T], Th, [H|O]) :-
thread_options(T, Th, O).
thread_option(local(_)).
thread_option(global(_)).
thread_option(trail(_)).
thread_option(argument(_)).
thread_option(stack(_)).
%! call_in_thread(+Thread, :Goal) is semidet.
%
% Run Goal as an interrupt in the context of Thread. This is based on
% thread_signal/2. If waiting times out, we inject a stop(Reason)
% exception into Goal. Interrupts can be nested, i.e., it is allowed
% to run a call_in_thread/2 while the target thread is processing such
% an interrupt.
%
% This predicate is primarily intended for debugging and inspection
% tasks.
call_in_thread(Thread, Goal) :-
thread_self(Thread),
!,
once(Goal).
call_in_thread(Thread, Goal) :-
term_variables(Goal, Vars),
thread_self(Me),
A is random(1 000 000 000),
thread_signal(Thread, run_in_thread(Goal,Vars,A,Me)),
catch(thread_get_message(in_thread(A,Result)),
Error,
forward_exception(Thread, A, Error)),
( Result = true(Vars)
-> true
; Result = error(Error)
-> throw(Error)
; fail
).
run_in_thread(Goal, Vars, Id, Sender) :-
( catch_with_backtrace(call(Goal), Error, true)
-> ( var(Error)
-> thread_send_message(Sender, in_thread(Id, true(Vars)))
; Error = stop(_)
-> true
; thread_send_message(Sender, in_thread(Id, error(Error)))
)
; thread_send_message(Sender, in_thread(Id, false))
).
forward_exception(Thread, Id, Error) :-
kill_with(Error, Kill),
thread_signal(Thread, kill_task(Id, Kill)),
throw(Error).
kill_with(time_limit_exceeded, stop(time_limit_exceeded)) :-
!.
kill_with(_, stop(interrupt)).
kill_task(Id, Exception) :-
prolog_current_frame(Frame),
prolog_frame_attribute(Frame, parent_goal,
run_in_thread(_Goal, _Vars, Id, _Sender)),
!,
throw(Exception).
kill_task(_, _).